Case Studies
Software UAT Case Study – Finserv
This is a case study on conducting User Acceptance Testing (UAT) of a complex B2E software application. Involved testing of several critical HR and Payroll modules. [emaillocker id=”1873″] Software UAT Case study – Finserv from OAK Systems Pvt Ltd [/emaillocker]
Case Study – Testing of Network Health Monitor product
This case study outlines our experience in a product related to monitoring of network resources using SNMP, HTTP protocols, where end users are typically Data centers. [emaillocker id=”1873″] [/emaillocker] Case Study on Testing of Network Health Monitoring Software System from Oak Systems About the Client: One of the leading Network Management solution providers. About the
Case Study – Radar CDU Testing
[emaillocker id=”1873″] [/emaillocker] A Case Study on Radar CDU Testing from Oak Systems Background Low Level Light weight Radar (LLLR) for army air defence for detecting and tracking all kinds of aerial targets flying at ultra-low, low and medium altitudes was developed by a DRDO lab with a State-of-the-Art display unit called Commander Display unit
Case Study- Performance Testing For eLearning Portal
[emaillocker id=”1873″] [/emaillocker] A case study on Performance Testing of eLearning Portal from Oak Systems Background An eLearning Portal was to be launched within a few weeks. It was a ‘mission critical project’ for the customer- SP (service provider) who is involved in providing eLearning to universities with large base of students The portal functionality
Case Study on Testing the Banking Software: Finacle – UAT
This case study outlines our experience on carrying out User Acceptance Testing of Finacle – universal banking product from Infosys. Functional testing, system integration testing including customization testing were covered as part of this project. [emaillocker id=”1873″] [/emaillocker] A Case Study in Banking UAT from Oak Systems About the Client One of the Leading Banks
Selenium based Test Automation Framework for an eCommerce App
Developing a test automation framework for an eCommerce portal such that there would be minimal maintenance of test scripts whenever the portal changes. Selenium was selected as ‘the tool’ after evaluating several options – both COTS and Open Source. The primary need of the automation framework was for regression testing. [emaillocker id=”1873″] [/emaillocker] A case
Automation of Data Validation of a Telecom Billing System
It is a herculean task to validate the billing data in any Telecom environment. Faced with a series of rules, exceptions and combinations of possibilities, validation of the billing data takes enormous amount of time and energy. As part of this project, OAKSYS automated the data validation process using the Test automation tool – QTP.
Performance Profiling
The goal of this project was to conduct profiling of the performance behavior of a software product meant for the global Financial industry. As the intended software was going to be used in a high-profile, response-critical environment, the performance profiling of the software was carried out to understand the impact of varied loads on the
V&V for Avionics System
OAKSYS was a proud partner in the IV&V programme of a complex fly-by-wire Avionics Software system. Primarily, DOD-STD-2167A standards were used in the programme. The experience and knowledge gained during the programme is phenomenal and all inclusive and has set the foundation for all the IV&V activities of smaller systems since then. Here are the
Test Automation under RUP
Functional Test Automation of an Insurance software that was being developed under RUP development model. The Test strategy was designed to match the SDLC. The testing had to align with development speed and the market priorities. Test automation was introduced early in life cycle to gain testing speed and for early detection of defects. [emaillocker