White Papers / Technical Videos
DO-254: An overview
Here is an overview about RTCA / DO254 guidelines. This presentation was made to the scientists of DRDO labs in Bengaluru recently. DO-254 provides design assurance guidance for the development of airborne electronic hardware such that it safely performs its intended function, in its specified environments. If you wish to know more about our expert
V&V Considerations in Implementing IEC61508-3
V&V Considerations In Implementing IEC61508-3 by Mr Hanumanth Managoli, Sr Consultant-Oaksys ; Here is the link to his talk delivered at Embedded Safety and Security Summit (ESSS) 2016.. If you wish to know more about our expert services in IEC61508-3 standard, please click here
V&V Lessons Learnt under Multiple Standards – ESSS 2016
V&V Lessons Learnt Under Multiple Standards by Mr Pradeep Oak, Director-Oaksys; Here is the link to his talk delivered at Embedded Safety & Security Summit (ESSS) 2016. If you wish to know more about our expert services in DO254 or DO178 standard, please click here
Considerations in Verification of Safety Design – ESSS 2016
Considerations in Verification of Safety Design by Mr Hanumanth Managoli, Sr Consultant-Oaksys. Here is the link to his talk delivered at Embedded Safety & Security Summit (ESSS) 2016. If you wish to know more about our expert services, please click here
DO-178B: Software Planning Process – Part 2 (Video)
A training on software planning process was delivered by Pradeep.Oak, director and founder of Oak Systems. The purpose of the software planning process is to define how the software product will be developed. The planning process must ensure the development of a product that will satisfy the system requirements and provide a product that is
DO-178B: Software Planning Process (Video)
A session on DO-178B was held, and discussion on software planning process was delivered by Pradeep Oak, CQA. This is 1st part of the topic. The life cycle processes in DO-178B which includes the software planning process, the software development process and other integral processes. DO-178B defines 5 types of planning data for the software
DO-178B: What is System View to Avionics Software (Video)
The software requirements process uses the outputs of the system life cycle process to develop the software high-level requirements. These high-level requirements include functional, performance, interface and safety-related requirements. Each system requirement allocated to software must map to one or more software requirement. A training session on DO-178B, discussing the System View to Avionics software
D0-178B: How to choose Software Life Cycle (Video)
The software life cycle processes in DO-178B are organised into the following three groups: planning, development, and integral. The planning process defines the plans that direct the activities of the development and integral processes, and describes how to coordinate those activities. The development processes describe the ‘objectives, activities and control procedures’ that produce the software
DO-178B: An Introduction (Video)
An Introduction on DO-178B was delivered as part of a training session by Mr. Pradeep Oak, founder & Director of Oak Systems. DO-178B is the guideline for developing safety-critical avionics software systems and is developed by RTCA. This is widely used in the Civil aerospace and also being adopted into Defense Aerospace. DO-178B discusses those aspects
DO-178B: Software Levels and Objectives (Video)
A training on different levels of DO-178B (DO178B) and its objectives by Mr. Pradeep Oak, founder & Director of Oak systems. Author of “Software Testing – Effective Methods, Tools and Techniques ”. He is among the first twenty Certified Quality Analysts (CQA) of India. The purpose of DO-178B is to provide guidelines for the production