Case Studies
Case Study on IV&V of the Landing Gear Controller
Case Study on IV&V of the Landing Gear Controller from Oak Systems
Case Study on IV&V of Attitude and Heading Reference System
Case Study on IV&V of Attitude and Heading Reference System from Oak Systems
Case Study on IV&V of an Agriculture Drone
“AeroGCS GREEN is mission planning and precision spraying software that will focus on growing healthier and greener farm fields to improve lives. It works on the Android operating system. The strongest feature of this product is that “a hand-held instrument can communicate with and control the drone.” It is user-friendly and simple to use. The uniform
Case Study on IV&V of Automatic Flight Control Panel
3-axis (Pitch, Roll, and Yaw) simplex and 4-axis AFCS (Pitch, Roll, and Yaw & Collective) digital Automatic Flight Control System (AFCS) on LUH are used to provide stability, controllability, and autopilot modes for ease of flying. The AFCS consists of an Automatic Flight Control Computer (AFCC) and an Automatic Flight Control Panel (AFCP). The AFCC
Case Study on Advanced light weight torpedo (Software IV&V)
Advanced lightweight torpedo (ALWT) is an antisubmarine torpedo that can be launched from multiple platforms such as ships, Helicopters or Aircrafts.It has Advanced on board computer which enables target detection system in both Active and passive mode. The target location can be either pre-set or changed based on opportunity. System also has powerful Homing in
Case study – Test Automation of a Mobile Application
A Case study on building a “Test Automation Framework for a Mobile software”. The ERP application developed by our Customer was both mobile and browser compatible. A hybrid Test Automation Framework was developed to address the Software Testing needs involving both Mobile and Browser interfaces in the same workflow. Selenium and Appium tools were used.
Case study on operating an Offshore Delivery Center (ODC)
A Case study on operating an Offshore Delivery Center (ODC). This ODC infrastructure and teams were specifically put together for a US based customer in the Industrial Automation space with a team size of 6 – 23 Engineers. Case study on operating an Offshore Delivery Center (ODC) from Oak Systems
Case study – IV&V of Standby Engine Instrument
Presenting a Case study on Software Verification & Validation (IV&V) for a subsystem of a Defence Helicopter. The IV&V was carried out in accordance with the RTCA DO178B DAL B guidelines. With over 2 decades of strong experience, Oaksys was chosen to carry out the full lifecycle IV&V of the said subsystem. This is one
Banking Case study: UAT Support for CBS Migration
A Banking Case Study – User Acceptance Testing (UAT) Support for CBS Migration at a mid sized bank in the Caribbean. The bank had planned a migration of the Hardware, DB and the CBS software from the existing one to the newer supportive version with the “AS IS” functionality. The Bank team looked at Oaksys
Case study – Introduction to TTCN-3 and AUTOSAR Conformance Testing
This is a case study on Introduction to TTCN-3 and AUTOSAR. And also aspects of AUTOSAR Conformance Testing. [emaillocker id=”1873″] Introduction to TTCN-3 and AUTOSAR Conformance Testing from Oak Systems [/emaillocker]